Actualizaciones de sistema

Estamos experimentando problemas que pueden afectar a tus servicios Square. Continuaremos actualizando nuestra página de estado con más información.

Volver a Inicio

Additional Installation Options for Square Stand Mount

VESA Hardware Compatibility

The VESA (Video Electronics Standards Association) is a standard for attaching electrical hardware such as flat panel displays, monitors, and televisions to mounts. The VESA standards are defined with specific measurements and requirements, to make it easier for customers to find the correct mounting product that will fit their device.

Square Stand Mount is compatible with any 100x100mm VESA MIS-D mounting system, including standing pedestals and swing-arms (sold separately). 

Using the 4 VESA screws included with Square Stand Mount, you can attach the back of Square Stand Mount to a 100x100mm VESA mounting system.

Standalone Pedestal

You can attach Square Stand Mount to a compatible VESA standing pedestal. This setup is ideal for setting up a self-serve station for your customers, paired with a compatible third-party kiosk apps.

For pedestals with a hollow center, you can conceal the connection cable by threading it through the pedestal from the bottom of Square Stand Mount.

Wall VESA Mount

Square Stand Mount comes with two brackets for stationary wall mounting - angled and flat. For more flexibility in display options, consider a VESA swivel wall mount. A swivel wall mount will allow you to adjust the angle and position of your Square Stand Mount by moving the adjustable arm.


Countertop VESA Mount

Square Stand Mount can be placed on the countertop using the angled bracket included. For a more versatile experience, consider a VESA adjustable countertop mount. A mount with swivel features will allow you to adjust the angle and position of your Square Stand Mount by moving the adjustable arm while the base remains in place on your countertop.

Additional Installation

Square Stand Mount can be mounted to drywall, wood, brick, concrete, tile, and ceramic wall surfaces using the included angled or flat brackets. The drill bill included in the box is for drywall and wood wall types only. For mounting to other wall types, use the following drill bits based on the material of your surface:

  • Concrete and brick surfaces: use a 6.35mm (¼”) x 100mm long masonry drill bit

  • Tile and ceramic surfaces: use a 6.35mm (¼”) x 100mm long carbide-tipped drill bit

Once the holes have been drilled into the mounting surface, installation of the Square Stand Mount is the same regardless of surface. Select your desired mounting style below to learn more.