Troubleshoot payment errors on Square Stand
Square Stand can accept a variety of payments depending on the model. This article provides troubleshooting steps for your Square Stand if you are experiencing issues accepting payments.
Before you begin
When to troubleshoot
Troubleshooting payment issues involves steps that may take a bit of time, such as rebooting your hardware. If at all possible, try to troubleshoot your Square Stand after business hours. If you must troubleshoot during the workday, try to avoid peak busy hours so your customers will experience few delays.
Step 1: Verify sale requirements
Make sure the transaction is at least $1.00.
Check that you’re taking a payment in the country where you activated your account.
Test a different card.
Step 2: Check Square Stand is plugged in and powered
Make sure Square Stand is firmly plugged into the USB accessory hub, and that the hub is plugged into a power adapter.
Step 3: Confirm the point of sale app is up to date
Open the App Store > tap your profile icon.
Scroll down to see pending updates.
Tap Update All to update all apps on your device, or locate the Square POS app and tap Update.
Step 4: Confirm iOS software is up to date
Go to Settings > General > Software Update.
The screen shows the currently installed version of iOS and whether an update is available.
If applicable, tap Download and Install.
Step 5: Check Square Stand connections
Make sure the point of sale app recognises Square Stand. To do so, navigate to ≡ More > Settings > Hardware > Square Stand to check the connection status.
Check that Square Stand and the iPad are properly connected. You can confirm this by referencing the status bar at the top of the point of sale app.
Step 6: Reboot your iPad and Square Stand
Push down on the raised security latch on Square Stand and slide your iPad out carefully towards the left. Take care not to pull the iPad up from the Square Stand prior to disconnecting as this can damage the iPad connector.
Press and hold the iPad’s top button until the power off slider appears. Drag the slider, then wait for 30 seconds for your device to turn off. To power your device back on, press and hold the top button until you see the Apple logo.
Reinsert your iPad into Square Stand. You’ll know it’s locked in place when you hear the security latch click.
Plug Square Stand out of the power outlet and back in.
Step 7: Delete and reinstall the point of sale app
Uninstall the point of sale app from your iPad. Before uninstalling, make sure you’ve uploaded any offline payments, or you’ll lose those uncompleted payments.
Touch and hold down the app on the Home Screen, tap Delete App, then tap Remove.
Reinstall the point of sale app in the App Store.
When you reopen the app, make sure you grant each requested permission, or the Square Stand will not function properly.