Set up and use the Belkin Charging Station for Square Handheld
About the Belkin Charging Station for Square Handheld (5-slot)
The Belkin Charging Station for Square Handheld (5-slot) lets you charge and store up to five Square Handheld devices at once — no individual cables to plug and unplug between shifts. LED indicators on the station show when each device is fully charged and ready for service. Its compact, lightweight design and 6.5 ft. power cord give you flexibility in where you place the station in your venue.
The Belkin SheerForce Case is required on each Square Handheld for correct alignment in the charging slots. The charging station, Square Handheld devices, and Belkin SheerForce Cases are sold separately.
What’s included:
1 x Belkin Charging Station for Square Handheld (5-slot)
10 x USB-C magnetic charging adapters
6.5 ft. / 2 m power cord
Power supply built into the station
Before you begin
Each Square Handheld you plan to charge must have a Belkin SheerForce Case installed for proper alignment.
A USB-C magnetic adapter must be connected onto each Square Handheld. 10 USB-C magnetic adapters are included in each package.
Make sure you have a power outlet within reach of the 6.5 ft. power cord, or plan your placement accordingly.
Set up the Belkin Charging Station
Choose a stable, flat surface near a power outlet — the 6.5 ft. power cord should reach without stretching.
Connect the charging station's power cord to a power outlet.
Confirm the LED indicators illuminate to show the station is receiving power.
Charge your Square Handheld devices
Confirm each Square Handheld has a Belkin SheerForce Case and a USB-C magnetic adapter installed before placing it in a slot.
Drop each device into an open charging slot — no cable connection required.
Check the LED indicator for that slot. A lit indicator confirms the device is charging; a fully charged device is indicated when the LED shows a charged state.
Repeat for up to five devices across the available slots.
When the LED indicator shows a device is fully charged, lift it out of the slot and bring it to the floor.