Home>Set Up

Set up Square Register

What’s in the box

Let’s get your Square Register up and running. Start by taking a look at what’s in the box.

what's in the box

Get connected

1. Remove the protective wrap.
Carefully lift the customer display out of Square Register and remove the foam pad. Lay the customer display down flat and leave it aside for now.

2. Connect the hardware hub to Register.
Simply plug the cable into one of the micro USB ports located at the bottom of Square Register.

3. Connect the power adapter to the hub.

4. Plug it in.
With the power adapter cable, plug one end into the power adapter and the other end into a power outlet.

plug it in

Set up your counter

Choose a setup. There are two ways to set up the customer display.

Docked

Simply place the customer display back into its slot on Register. Press firmly on the bottom edges of the customer display until you hear it click to ensure it’s locked in place. Double-check each side of the display, both sides need to be snapped in evenly for the customer display to function in the docked position. If you need to undock the customer display, press and hold the release latch located on the bottom of Square Register and lift the customer display out. Be sure that the latch is completely released before removing the display as it cannot be removed without the latch release.

docked

Undocked

Using the included micro USB cable, plug one end into the customer display and the other end into the bottom of Square Register.

undocked

Mount Square Register

Choose a mounting setup. There are two ways to mount Square Register to your counter.

Adhesive

1. Pick a spot to mount.
Using a damp cloth, clean the area where you want to secure Square Register. Wait for the surface to dry completely.

2. Prepare the adhesive.
Grab the mounting plate. Remove the paper backing from the adhesive located on the underside of the plate.

3. Position properly.
Make sure the raised cleat of the mounting plate is on your side of the counter, not the customer’s side. Adhere the plate to your counter in the desired position and press down firmly for 30 seconds. Wait 30 minutes for the adhesive to set. If you need to remove the plate, slowly pull the tabs on the adhesive strips until it releases.

4. Twist and lock.
Place Register onto the mounting plate with the larger screen facing right. Make sure the cleat is positioned in its slot. Turn Register 90 degrees clockwise so it locks in place.

Keep in mind, you should not attach the mounting plate to the Square Register before attaching the plate to your countertop, you won’t be able to remove the plate from Square Register.

Screw-mount

1. Pick a spot to mount.
Grab the mounting plate. Pick a spot on your counter for Square Register, position the plate and use a pencil to mark the four screw holes on your counter. Make sure the raised cleat is on your side of the counter, not the customer’s side. Note: Maximum counter thickness is 45 mm (1.75 inches).

2. Drill holes into your counter carefully.
You’ll need a drill and the included tools: drill bit, thumbscrew and thumb nut. Use the drill and drill bit to make the four holes you’ve marked for the plate.

3. Position properly.
Position the mounting plate onto the holes you’ve drilled, then insert a thumbscrew into each hole. From the underside of your counter, place a thumb nut onto each thumbscrew and tighten until the thumb nut is flush against your counter.

4. Twist and lock.
Place Square Register onto the mounting plate with the larger screen facing right. Make sure the cleat is positioned in its slot. Turn Square Register 90 degrees clockwise so it locks in place.

Note: You should not attach the mounting plate to the Square Register before attaching to the plate to your countertop, you won’t be able to remove the plate from Square Register.

Power up

Press and hold the power button on the base of the Square Register display until the Square logo appears on the screen. Now Square Register is ready to set up!

Note: Square Register needs to be plugged into a power outlet at all times to function and is not battery powered.

Connect to your network

When you turn on Square Register for the first time, you’ll be asked to complete some setup steps. Please follow the instructions to set up your time, time zone, language and network connections; Wi-Fi or Ethernet.

Creating your account and signing In

If you already have an existing Square Point of Sale account, simply sign in to your account using either your email address or by creating a new device code in your online Square Dashboard. If not, you can create an account on your computer, on Square Register or by scanning the QR code with a separate device. When you create your account, you’ll be able to create items, set up taxes and set up your team members.

After you sign in, you can access the Square Point of Sale Setup Guide on your Square Register. The setup guide will walk you through setting up a bank account for transfers, creating items, ordering additional hardware and more.

To access the Square Point of Sale Setup Guide on Square Register:

  1. Tap ≡ More in the bottom navigation bar.

  2. Tap Support > Setup Guide.

Update Square Register Software

After you connect Square Register via Wi-Fi or Ethernet and sign in to your account, you’ll be prompted to choose a software update option: Update Now or Update Later. The initial software update takes around 20 minutes to complete, but may take up to one hour in the future.

  • Tap Update Now to start the software update immediately. You won’t be able to accept card payments during a software update, but you can record cash payments and navigate within the app.

  • Tap Update Later to defer the software update. The software update will start automatically overnight as long as Square Register is turned on and plugged in.

Note: Software updates for Square Register will complete first, followed by software updates for the customer display.

Connect recommended hardware

Square Register makes it easy to connect compatible USB devices such as cash drawers, receipt printers and barcode scanners. Learn more on how to connect recommended hardware to Square Register.

Can't find what you need?