Download the Square Kiosk App

Before you begin

Visit the following link on your desktop or laptop to quickly begin or resume setting up your kiosk: Square Kiosk beta onboarding. This kiosk onboarding guide will walk you through the initial steps to download the app, set up a device code, and sign-in.

These steps are outlined in more detail below if you need to reset a kiosk after you have already onboarded from your Square Dashboard.

Download Square Kiosk App

Visit the App Store to download Square Kiosk

Sign in

On your iPad, open the Square Kiosk app and sign in with a device code. Use the device code you created for the kiosk device at the location you’d like to set up your kiosk. 

If your device code has expired, create a new code on your Square Dashboard.

1. Navigate to Settings > Device management.

2. Click Select the Kiosk Device > Reset Device Code. This new 12 digit code can be used to sign into the Kiosk.

Sign Out

Press the Get Started screen with two fingertips for 5 seconds, and you’ll be prompted for the owner passcode to access device settings and sign out.

Contact us

Let us know if you have any questions while going through setup – we’re here to help. Reach us at square-kiosk-beta@squareup.com. Share your experience with Square Kiosk by filling out our feedback survey.

Read next

• Review the Support Center article: Set up your hardware with Square Kiosk.

• Return to the Square Kiosk learning library.