Square Stand for iPad (2017, 2018), iPad Pro 9.7", iPad Air 2, and iPad Air Wi-Fi Kit Setup Guide
Included in the Kit
|Square Stand for contactless and chip|
|USB receipt printer|
|Receipt printer paper|
|Printer-driven cash drawer|
|USB bar code scanner|
|Ethernet ticket printer (for food and beverage)|
|Kitchen printer paper (for food and beverage)|
|USB wall charger|
Let’s get set up
What You Need to Get Started
- Internet access
- If you purchased the optional Ethernet kitchen printer, you also need an Ethernet Internet connection (e.g., cable modem, router, and Ethernet cable).
Follow these steps to assemble your kit:
Step 1. Download our free point-of-sale app
If you haven’t already, download Square Point of Sale from the App Store to your iPad.
Step 2. Connect to Wi-Fi
Head into the Wi-Fi settings on your iPad, choose your router’s network, and wait a few seconds for the signals to communicate. If you’re having trouble connecting, unplug the router’s power cord and Ethernet cable, then plug everything back in.
Step 3. Secure your iPad
Be sure your Square Stand is connected to the USB hardware hub (included) and plugged into a power outlet. Slide your iPad into Square Stand, and secure it by inserting the included security pin into the headset jack.
Step 4. Connect what you need via USB
Plug your Dock for Square Reader, receipt printer, and bar code scanner (optional) into the USB hardware hub that comes with your Square Stand.
Step 5. Slide in your Square Reader
Insert your Square Reader for contactless and chip into the Dock for Square Reader. The dock powers your reader.
Step 6. Set up your cash drawer
Take the interface cable (labeled CD-014A) from the cash drawer packaging. The larger end plugs into the bottom of your cash drawer, and the smaller end plugs into the DK port on the back of your receipt printer.
Your Square app is designed to automatically open the cash drawer after every cash sale. Or you can use the included manager keys to manually open the cash drawer.
Step 7. Connect your kitchen printer (optional)
Connect one end of the Ethernet cable into your kitchen printer and the other end into another of your router’s output ports. Plug your printer into a power source, then switch on the power.
Step 8. Add paper to your printer(s)
Lift the lever on the top-right side of your printer, open it up, and rest the printer paper inside. The trick is to keep the roll underhand, leave a little slack, and then shut the top with some paper sticking out. Once you get a solid green light, it’s good to go.
Step 9. Test it out
Open your Square Point of Sale app. Tap the three lines on the bottom left to access the Settings sidebar menu.
Tap Settings > Printers. From here, you’ll see all available printers. Select your printer from the list and make sure to turn on Receipts, Order Tickets, and/or Order Ticket Stubs.
Then tap Cash Drawers, select your cash drawer, and tap Test Cash Drawer to make sure it pops open automatically.
Then tap Bar Code Scanners and make sure your scanner appears in the list of connected devices. Test it by scanning a bar code.
Need Onsite Support?
Call our partner Boomtown.
Boomtown can send a local technician onsite to set up your Square hardware and network, and provide technical support for your business.