Connect Recommended Hardware to Square Register
Square Register makes it easy to connect compatible cash drawers, receipt printers and barcode scanners. To start, be sure your Square Register is connected to the Hub, plugged into a power outlet and powered on.
Connect Hardware to Square Register
From printers to cash drawers, connecting hardware usually requires a few simple steps to get you up and running. Refer to the instructions below for commonly used, third-party hardware accessories.
Important to Note
Prior to connecting hardware, ensure that your Square Register is connected to the Hub, power adapter and power adapter cable.
When a piece of hardware is properly connected, Square Register will confirm with an on-screen notification as well as with an audio indication.
Other Bluetooth-connected hardware accessories that aren't printers, including Bluetooth-connected barcode scanners, are not supported with Square Register at this time.
USB and Ethernet Printers
Depending on the printer model, plug the appropriate cord directly into your USB accessory hub or router.
Tap More from the navigation bar at the bottom of your screen, then tap Settings > Hardware.
Tap Printers > Profiles > Create printer profile.
Enter a profile name and specify what the printer profile will be used for (e.g. Receipts, Bills and Reports, Order Tickets or Order Ticket Stubs).
Review your printer settings – including the option to Automatically Print Receipt, Enter Custom Name or Number, Auto-Assign Ticket Numbers or select the specific categories to print on the ticket.
Tap Save and then tap Assign printer.
Select the printer from the list of connected printers or tap Connect new printer and follow the prompts to connect.
Tap Save.
Learn more about connecting a receipt printer to your Square Register:
Bluetooth printers
Before pairing your Bluetooth printer, make sure your printer is connected to a power source and turned on. The power switch will either be on the back or the side of the printer. To get started:
On your Square Register, go to Settings > Hardware.
From the options listed, locate Bluetooth and toggle the option to ON.
Under Supported Devices, find your branded device (Star or Epson) and select Connect.
Your Bluetooth printer model should then appear on the screen. Select your printer and tap Confirm.
Select Allow access and Pair.
Once you pair your printer to Square Register, you’ll need to create a printer profile that uses your Bluetooth printer to print receipts and order tickets. To get started:
From your Square Register, tap Settings > Hardware > Printers.
Tap Printers > Profiles > Create printer profile.
Enter a name for your printer profile and specify what the printer profile will be used for, such as Receipts, Bills and Reports, Order Tickets or Order Ticket Stubs).
Review your printer settings – including the option to Automatically Print Receipt, Enter Custom Name or Number, Auto-Assign Ticket Numbers or selecting the specific categories to print on the ticket.
Tap Save and then tap Assign printer.
Select the printer from the list of connected printers or tap Connect new printer and follow the prompts to connect.
Tap Save.
Compatible Bluetooth printer models
Star Micronics mC-Print3 / mC-Print31
Star Micronics mPOP
Star Micronics TSP654IIBi
Epson TM-M30
Star Micronics TSP143IIBi
Star Micronics SM series SM-T300i
Star Micronics SM series SM-S210i / SM-S210i2
Star Micronics SM series SM-S220i
Epson TM-m10
Epson TM-m30II
Printer-Driven Cash Drawers
1. After successfully connecting your printer by following the instructions above and creating a printer profile, connect the cash drawer's interface cable directly into your receipt printer.
2. Tap More from the navigation bar at the bottom of your screen > Settings > Hardware.
3. Tap Cash Drawers > tap Test Cash Drawer to ensure the hardware is working as needed.
Note: Printer-driven cash drawers will not appear under Available Cash Drawers, but you can ensure they work by tapping Test Cash Drawer as noted above.
USB Cash Drawers
1. Connect the cash drawer's USB cable directly into your Hub.
2. Tap More from the navigation bar at the bottom of your screen > Settings > Hardware.
3. Tap Cash drawers > confirm the appropriate cash drawer is listed under Available Cash Drawers.
4. Tap Test Cash Drawer to ensure the hardware is working as needed.
Barcode Scanners
1. With your Square Register running Square Point of Sale, plug your USB barcode scanner into the Hub.
2. Tap More from the navigation bar at the bottom of your screen > Settings > Hardware.
3. Tap Barcode scanners > confirm the appropriate barcode scanner is listed under Available Barcode Scanners.
Note: Bluetooth barcode scanners are not compatible with Square Register.
Troubleshoot the USB Barcode Scanner
If you have any trouble connecting your barcode scanner to Square Register. Please give the following troubleshooting tips a try:
Make sure Square Register is plugged into the Hub, and the Hub is plugged into a power adaptor. Ensure the power adaptor is plugged into an outlet.
Clear the Square Register USB accessory port of debris and dust.
Plug the barcode scanner into a different port on the Hub.
If you connect your barcode scanner and you receive the error message “USB DEVICE IS NOT COMPATIBLE”, you’ll need to reset your barcode scanner.
Review the following video to learn more about mounting Square Register to your countertop once you've finished setting up your hardware. You can also reference the articles below if you run into any issues.