Square Stand Kit Setup Guide
Square Stand works with any of Square’s point-of-sale software solutions, including the Point of Sale app. Please ensure you select the correct model for your iPad when purchasing:
iPad (8th generation 2020)
iPad (7th generation 2019)
iPad Pro 10.5”
iPad Air (3rd generation 2019)
The Square Stand is not compatible with the following iPad models:
iPad Air (4th generation)
iPad Air 2 (2014)
iPad Air (1st generation 2013)
iPad (1st generation)
iPad (5th generation 2017)
iPad (6th generation 2018)
iPad mini (all versions)
iPad Pro 12.9”
iPad Pro 11”
iPad Pro 9.7"
When ordering your Stand from Square Shop, ensure you have the correct model of iPad if you plan to purchase the iPad separately from another retailer. If you’re not sure, you can find out what iPad model you have in the Apple Support Centre.
Included in the Kit
Let’s get set up
What You Need to Get Started
If you purchased the optional Ethernet kitchen printer, you also need an Ethernet Internet connection (e.g. cable modem, router and Ethernet cable).
Follow these steps to assemble your kit:
Step 1. Download our free point-of-sale app
If you haven’t already, download Square Point of Sale from the App Store to your iPad.
Step 2. Connect to Wi-Fi
Head into the Wi-Fi settings on your iPad, choose your router’s network and wait a few seconds for the signals to communicate. If you’re having trouble connecting, unplug the router’s power cord and Ethernet cable, then plug everything back in.
Step 3. Secure your iPad
Be sure your Square Stand is connected to the USB hardware hub (included) and plugged into a power outlet. Slide your iPad into Square Stand and secure it by inserting the included security PIN into the headset jack.
Learn how to mount your Square Stand in our Support Centre.
Step 4. Connect what you need via USB
Plug your Dock for Square Reader, receipt printer and barcode scanner (optional) into the USB hardware hub that comes with your Square Stand.
Step 5. Slide in your Square Reader
Insert your Square Reader into the Dock for Square Reader. The dock powers your reader.
Step 6. Set up your cash drawer (optional)
Take the interface cable (labeled CD-014A) from the cash drawer packaging. The larger end plugs into the bottom of your cash drawer, and the smaller end plugs into the DK port on the back of your receipt printer.
Your Square app is designed to automatically open the cash drawer after every cash sale. You can also use the included manager keys to manually open the cash drawer.
Step 7. Connect your kitchen printer (optional)
Connect one end of the Ethernet cable into your kitchen printer and the other end into another of your router’s output ports. Plug your printer into a power source, then switch on the power.
Step 8. Add paper to your printer(s)
Lift the lever on the top-right side of your printer, open it up and rest the printer paper inside. The trick is to keep the roll underhand, leave a little slack, and then shut the top with some paper sticking out. Once you get a solid green light, it’s good to go.
Step 9. Test it out
Open your Square Point of Sale app. Tap the three lines on the bottom left to access the Settings sidebar menu.
Tap Settings > Hardware > Printers. From here, you’ll be able to create printer stations. Select your printer from the list and make sure to turn on Receipts, Order Tickets and/or Order Ticket Stubs.
Then tap Cash Drawers, select your cash drawer, and tap Test Cash Drawer to make sure it pops open automatically.
Then tap Barcode Scanners and make sure your scanner appears in the list of connected devices. Test it by scanning a barcode.
If you need any additional assistance, read more on how to troubleshoot Square Stand.