Square Register Set Up FAQ
Find answers to common questions about setting up your Square Register.
Follow this Square Register set up guide for step-by-step instructions.
It depends on your preference and how the counter is set up at your business. Here are some considerations that might influence your decision. Also, you can always experiment each for a few days before you decide.
- How much space do you have on your countertop? Docking the customer display to Square Register makes things more compact. Also, since there is no need to connect the two displays via USB cable, there’s one less cable to worry about.
- Do you have a split countertop? If you have a countertop that has a different height for customers vs cashiers, you might find it better to undock and connect customer display via USB to allow the flexibility in height.
- Which allows better angle for your customers? For a wider, lower or higher countertop, it might be hard to optimise the placement for both cashiers and customers. It would be easier to optimise the placement of two screens separately by undocking and connecting via USB.
- Do you want to be able to see the customer display more easily? Undocking and connecting customer display via USB may allow cashiers to look over the customer display screen more easily in case you want to help customers. Although the cashier will be able to see what actions are being performed on the customer display at any given time, if you want to see exactly what customers are seeing, we recommend that you undock and connect customer display via USB.
There are two ways to connect Square Register to your network: Wi-Fi and Ethernet. You can connect to Wi-Fi through Device > Network. Or you can hardwire through the Ethernet port on the USB hub. Make sure to check the network connection in the same section. You can also quickly check via the Wi-Fi / Ethernet network status indicator at the top-right corner of the status bar.
If you can connect via Ethernet, you can do so through the Ethernet port on the USB hub. If not, the next best step is to activate the hotspot on your personal mobile device and connect Square Register to your device’s Wi-Fi signal through Settings > Hardware > Network.
If you’re unable to connect, you can enable Offline Mode and continue to accept payments even if your Wi-Fi is down.
Learn more about accepting payments in Offline Mode.
You can tilt the cashier side display. However, you can’t adjust the angle of the customer display other than what’s allowed from docking and undocking, and connecting via USB cable.
There are two ways to secure the device to your countertop – using adhesive or screwing with a mounting plate.