Bike is completely disassembled for our top-tier, most detailed cleaning. All bearings, bottom bracket, headset, wheels, derailleur, and chain are removed and checked, individually cleaned and re-greased (if applicable). Wheel true, brake and gear adjustment, screws torqued to spec Nm, and a complete diagnostic of the bike is done. Bike is reassembled, drivetrain properly lubed, tires/tubes filled to recommended PSI.
$225.00 ・ 3 hr 30 min
$30.00 ・ 30 min
Keep your eBike and computer up to date at all times with regular software updates in order to enhance smart functions, update maps and improve features. Your local Bosch certified dealer will advise you about new software availability.
$55.00 ・ 30 min
Come by and try the bike of your preference without any commitment!
Free ・ 30 min
Wheels, chain, crank, and derailleurs are removed for a highly detailed bike cleaning and air dry. The removed parts are individually cleaned and air dried. Wheel true, brake and gear adjustment, screws torqued to spec Nm, and a complete diagnostic of the bike is done. Bike is then put back together, drivetrain properly lubed, tires/tubes filled to recommended PSI.
$140.00 ・ 2 hr 30 min
Wheels are removed and bike is cleaned. Chain is removed and deep cleaned. Wheel true, brakes and gears adjusted, screws are tightened to spec Nm, and a complete diagnostic of the bike is done. Bike is air dried, drive train is properly lubed, tires/tubes filled to recommended PSI.
$80.00 ・ 1 hr 30 min
Bike is washed while fully assembled, air dried, then the drivetrain is properly lubed. Tires/tubes filled to recommended PSI.
$50.00 ・ 45 min
BB installation, Headset, Fork fit, Full Wheel build , cassette, Deraileaurs, Pulley change. Etc...
$250.00 ・ 4 hr
BB installation, Headset, Fork fit, Full Wheel build , cassette, Deraileaurs, Pulley change. Etc...
$190.00 ・ 2 hr
Tire check + Tube Replacement / Sealant Application + Aire Pressure
(Tube/Sealant Not Included)
$20.00 ・ 15 min
Removing Handlebar and Stem + Cleaning and replacing Grease + New Bearings installation (if necessary)
$55.00 ・ 1 hr 30 min
Removing Handlebar and Stem + Cleaning and replacing Grease + New Bearings installation (if necessary)
$90.00 ・ 1 hr 30 min
Removing Pedals and Crankset + Cleaning and replacing Grease + New Bearings installation (if necessary)
$55.00 ・ 1 hr
Removing Pedals and Crankset + Cleaning and replacing Grease + Tension Adjustment+ Noise Free
$30.00 ・ 30 min
Handlebars + Saddle + Pedals + Bar Tape + Crankset + Drivetrain
Price varies ・ 30 min
Per Brake
Price varies ・ 30 min
Remove Wheels from Bike + True
Price varies ・ 30 min
Special
Price varies ・ 30 min
Price varies ・ 30 min
$35.00 ・ 30 min
Price varies ・ 30 min